ICP Gas Valve Support Bracket for RGS150HEBA0AGAA – OEM Mounting Hardware | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part 1178238) for the ICP/Tempstar/Heil RGS150HEBA0AGAA gas furnace — a mounting component, not the gas valve itself. The bracket secures the gas valve in position and supports the manifold so the valve and burner gas line stay properly aligned and free of strain. Replace it when the original bracket is bent, corroded, or cracked, or when reinstalling a gas valve during service. A solid bracket prevents stress on the gas-line connections that can lead to leaks or misalignment.

Specifications

Compatibility

Designed for the gas valve and manifold assembly in the ICP/Tempstar/Heil RGS150HEBA0AGAA and related International Comfort Products furnaces (Heil, Tempstar, Comfortmaker, Arcoaire, KeepRite). This is a support bracket only — order the gas valve separately if the valve itself requires replacement.

Installation Guide

1. Safety First – Shut off the gas supply and disconnect electrical power, then verify zero voltage with a multimeter.
2. Access – Remove the furnace burner-compartment door.
3. Document – Photograph the gas valve, manifold, and bracket positions before disturbing anything.
4. Remove – Support the gas valve, remove the mounting screws, and take out the old bracket without stressing the gas line.
5. Install – Position the new bracket, refasten the gas valve and manifold, and confirm proper alignment.
6. Test – Restore gas, leak-check all joints with approved solution, then restore power and confirm normal heating operation.

Signs You Need a Replacement

• Bracket bent, cracked, or heavily corroded
• Gas valve loose or sagging from its mount
• Manifold or gas line under visible strain
• Missing bracket after a prior valve replacement

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns on uninstalled parts. Always leak-test gas connections after any service. Backed by the National HVAC Parts fitment guarantee.