ICP Gas Valve Support Bracket for RGS150HEAA0AAAA — OEM 1178238 | Ships Today

Overview

This is the OEM gas valve support bracket (part number 1178238) for the ICP / Tempstar / Heil RGS150HEAA0AAAA gas furnace. The bracket mounts inside the burner compartment and holds the gas valve in its correct fixed position relative to the manifold and burners. A secure, properly aligned valve is critical for safe combustion — the bracket prevents the valve and manifold from flexing, vibrating loose, or stressing the gas line connections during normal furnace operation. If the original bracket is bent, corroded, or was lost during a prior valve replacement, this genuine replacement restores factory mounting geometry.

Specifications

Compatibility

Designed specifically for the ICP RGS150HEAA0AAAA 150,000 BTU gas furnace and shared-chassis Tempstar, Heil, and Comfortmaker variants that use the same burner box layout. Always confirm your model number on the rating plate before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power. Verify zero voltage with a multimeter before touching any components.
2. Access — Remove the furnace front service panel to expose the burner compartment and gas valve.
3. Document — Photograph the gas valve, manifold, and bracket orientation before removing anything.
4. Remove — Loosen the manifold/valve mounting screws, lift the valve off the old bracket, and unfasten the worn bracket from the burner box.
5. Install — Fasten the new bracket in the original holes, reseat the gas valve, and torque the manifold connections to spec.
6. Test — Restore gas and power, then leak-test every joint with soap solution and confirm a clean burner ignition.

Signs You Need a Replacement

• Gas valve sags, tilts, or moves when touched
• Visible rust, cracking, or bending on the existing bracket
• Manifold-to-valve connections under mechanical strain
• Bracket missing after a previous valve repair

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.