ICP Gas Valve Support Bracket for RGS120SRCA0AAA — OEM Mounting | Ships Today

Overview

This OEM gas valve support bracket (ICP part #1178238) mounts and stabilizes the gas valve assembly inside the ICP / Heil / Tempstar RGS120SRCA0AAA furnace. The bracket holds the valve in proper alignment with the manifold and burners so the gas train stays rigid, leak-free, and correctly positioned during operation and transport. A bent, corroded, or missing support bracket can let the valve flex, stress the manifold connection, and create gas leaks or burner misalignment. Replacing the bracket with the factory-correct part restores safe, secure mounting of the gas valve. This is a structural mounting component — it does not include the gas valve itself.

Specifications

Compatibility

Built for the gas valve assembly in the ICP / Heil / Tempstar / Comfortmaker RGS120SRCA0AAA furnace and related chassis variants. Verify your existing bracket part number before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the service panel and burner-area cover to reach the gas valve.
3. Document — Photograph the bracket position and gas line routing before disassembly.
4. Remove — Support the valve, unbolt the old bracket, and detach it without stressing the gas connections.
5. Install — Fasten the new bracket, reseat the gas valve in proper alignment, and torque mounting hardware.
6. Test — Restore gas and power, leak-check all joints with soap solution, then confirm normal ignition.

Signs You Need a Replacement

• Loose or shifting gas valve in the cabinet
• Bent, cracked, or rusted bracket
• Stress or misalignment at the manifold connection
• Detected gas odor traced to valve movement

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.