ICP Gas Valve Support Bracket for RGS120LRBA0AAA | Ships Today

Overview

This OEM gas valve support bracket (part #1178238) mounts and stabilizes the gas valve assembly in the ICP / Heil / Tempstar RGS120LRBA0AAA gas furnace. The bracket holds the gas valve in its correct position relative to the manifold and burners, preventing strain on the gas piping and keeping the valve from shifting under vibration. A bent, corroded, or missing bracket can allow the valve to sag, stress the pipe joints, or misalign the manifold — conditions that can lead to gas leaks or unreliable burner operation. Replacing the bracket restores secure, factory-correct mounting of the gas valve.

Specifications

Compatibility

Engineered for the ICP/Heil/Tempstar RGS120LRBA0AAA furnace and shared chassis within the International Comfort Products family. Confirm the bracket's bend pattern and mounting holes against your original part before ordering.

Installation Guide

1. Safety First – Shut off the gas supply and disconnect power; verify zero voltage with a multimeter.
2. Access – Remove the burner/service panel.
3. Document – Photograph the gas valve and bracket orientation before loosening anything.
4. Remove – Support the gas valve, then unfasten and remove the old bracket without stressing the gas line.
5. Install – Position the new bracket and secure the gas valve in its factory location.
6. Test – Restore gas and power, then leak-test all joints with bubble solution and confirm normal burner ignition.

Signs You Need a Replacement

• Gas valve sags or shifts under vibration
• Bent, cracked, or corroded bracket
• Strain or stress visible on the gas piping joints
• Manifold or valve misaligned with the burners

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.