ICP Gas Valve Support Bracket for RGS120LFBB0AAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) mounts and stabilizes the gas valve assembly inside the ICP/Tempstar/Heil RGS120LFBB0AAA furnace — it is the mounting bracket, not the gas valve itself. The bracket fixes the valve in the correct position relative to the manifold and burners, preventing strain on the gas piping and keeping the valve from shifting under vibration. A bent, cracked, or corroded bracket can let the valve and manifold move, stressing the threaded gas connections and risking a leak or misalignment. Replacing a damaged bracket restores proper, secure valve mounting.

Specifications

Compatibility

Designed for the gas valve assembly in the ICP RGS120LFBB0AAA and equivalent Tempstar, Heil, Comfortmaker, and Day & Night platform furnaces. Verify the bracket geometry against your existing part before installing.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the burner/service panel to reach the gas valve.
3. Document — Photograph the bracket orientation and how the valve and manifold are mounted.
4. Remove — Support the gas valve, remove the bracket fasteners, and take out the damaged bracket.
5. Install — Position the new bracket, refasten it, and confirm the valve and manifold sit in their original alignment.
6. Test — Restore gas and power, then leak-check all gas connections with soapy solution and run a heat cycle.

Signs You Need a Replacement

• Bent, cracked, or corroded valve bracket
• Gas valve or manifold visibly loose or shifting
• Strain or movement at the threaded gas connections
• Bracket damaged during prior gas valve service

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.