ICP Gas Valve Support Bracket for RGS120LEBA0AGAA – OEM Mount | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) for the ICP RGS120LEBA0AGAA furnace mounts and stabilizes the gas valve on the burner manifold assembly. The bracket holds the valve in correct alignment so the inlet and outlet pipe unions stay properly seated and stress-free, preventing leaks and cracked fittings caused by an unsupported valve. A bent, corroded, or missing bracket can allow the gas valve to sag, stressing the manifold connections and creating a potential gas leak point.

Specifications

Compatibility

Designed for the ICP / Tempstar / Heil RGS120LEBA0AGAA gas furnace and related models using this OEM gas valve and manifold layout.

Installation Guide

1. Safety First – Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access – Remove the burner compartment service panel.
3. Document – Photo all wires and gas line routing before disconnecting.
4. Remove – Disconnect the gas line unions and valve wiring, then unfasten the old bracket from the manifold.
5. Install – Mount the new bracket, secure the gas valve to it, and reconnect the unions and wiring per your photo.
6. Test – Restore gas and power, then leak-test every joint with soap solution before operating.

Signs You Need a Replacement

• Gas valve sags or moves on the manifold
• Bent, cracked, or corroded bracket
• Stress or weeping at the gas line unions
• Bracket fasteners will not hold the valve secure

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.