ICP Gas Valve Support Bracket for RGS120LDAA0AKAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) mounts and stabilizes the gas valve assembly inside your ICP / Tempstar / Heil RGS120LDAA0AKAA furnace. It holds the valve in the correct position and orientation relative to the manifold and burners, preventing strain on the gas piping and keeping the valve from shifting under vibration. A properly mounted valve is critical for safe, leak-free gas delivery.

Replace the bracket if it is bent, corroded, cracked, or missing — often necessary after a gas valve replacement or when servicing the burner assembly. A loose or damaged bracket can place stress on the gas line fittings and allow the valve to move out of alignment.

Specifications

Compatibility

Fits the ICP Tempstar Heil RGS120LDAA0AKAA gas furnace and platform-equivalent models specifying gas valve support bracket 1178238. Verify the bracket shape and mounting holes against your unit before ordering.

Installation Guide

1. Safety First — Disconnect power and shut off the gas supply; verify zero voltage with a multimeter.
2. Access — Remove the burner/service panel to reach the gas valve and bracket.
3. Document — Photograph the bracket position and valve orientation before removing anything.
4. Remove — Support the gas valve, then unfasten and remove the old bracket.
5. Install — Position the new bracket and secure the gas valve in its original orientation per your photo.
6. Test — Restore gas and power, leak-check all gas connections with soap solution, and run a heat cycle.

Signs You Need a Replacement

• Bent, cracked, or corroded bracket
• Gas valve loose or shifting in position
• Strain on the gas line fittings
• Bracket missing after a prior valve replacement

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.