ICP Gas Valve Support Bracket for RGS120HRCA0AAA — OEM Mounting Bracket | Ships Today

Overview

This is the OEM gas valve support bracket (part number 1178238) for the ICP/Tempstar/Heil RGS120HRCA0AAA gas furnace. The bracket rigidly mounts and supports the gas valve assembly inside the burner compartment, holding the valve in correct alignment with the manifold and gas piping. Proper support prevents stress on the gas line connections and keeps the valve positioned for safe, reliable operation. A bent, corroded, or missing bracket can allow the valve to sag and place strain on the manifold joints — a potential gas-leak and safety concern — so the bracket should be replaced whenever it is damaged or when servicing the gas valve.

Specifications

Compatibility

Direct OEM replacement for the ICP, Tempstar, and Heil RGS120HRCA0AAA furnace. Used across ICP-family burner assemblies (Tempstar, Heil, Comfortmaker, Arcoaire). Confirm OEM part number 1178238 against your existing bracket before installing.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and piping orientation before disassembly.
4. Remove — Support the gas valve, unbolt the old bracket, and detach it from the chassis.
5. Install — Fasten the new bracket and secure the gas valve in its original alignment.
6. Test — Restore gas and power, then leak-test all gas connections with soap solution and confirm a clean ignition.

Signs You Need a Replacement

• Gas valve sags or is not held firmly in place
• Bent, cracked, or corroded bracket
• Visible strain on the gas manifold or piping
• Bracket damaged or removed during prior service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.