ICP Gas Valve Support Bracket for RGS102STCB0AAA — OEM Mounting Bracket | Ships Today

Overview

This genuine OEM gas valve support bracket (part 1178238) mounts and stabilizes the gas valve assembly inside the ICP/Heil/Tempstar RGS102STCB0AAA gas furnace. The bracket holds the valve at the correct position and angle relative to the manifold and inlet piping, preventing strain on the threaded gas connections and keeping the valve from shifting under vibration. A missing, bent, or corroded bracket lets the valve move, which can stress fittings and create gas leaks. Replacing a damaged bracket restores a rigid, factory-correct mount for safe operation.

Specifications

Compatibility

Fits the ICP/Heil/Tempstar/Comfortmaker RGS102STCB0AAA gas furnace and related RGS-series models using the same gas valve mounting configuration. Confirm the bracket matches your existing valve footprint before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power at the switch and breaker, and verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and piping orientation before disconnecting.
4. Remove — Disconnect the valve from the manifold and inlet line as needed, then unfasten the old bracket.
5. Install — Secure the new bracket, remount the gas valve, and reassemble piping using approved thread sealant.
6. Test — Restore gas and power, then leak-test all joints with soap solution and confirm proper ignition.

Signs You Need a Replacement

• Bent, cracked, or rusted-through bracket
• Gas valve shifting or sagging on the manifold
• Strain or movement at the gas piping connections
• Hardware holes elongated or stripped

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee. Always leak-test gas connections after service.