ICP Gas Valve Support Bracket for RGS102SFBB0AAA — OEM 1178238 | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part number 1178238) for the ICP RGS102SFBB0AAA gas furnace. The bracket secures the gas valve to the burner assembly, holding it in correct alignment with the manifold and burner orifices so the burners light cleanly and combustion stays within spec. Although it is a simple stamped-steel component, a missing, bent, or corroded bracket lets the gas valve and manifold shift, which can cause misaligned flames, delayed ignition, rattling at the burner box, or stress on the gas line connections. Replacing a damaged bracket restores proper valve positioning and protects the more expensive gas valve from vibration fatigue.

Specifications

Compatibility

Engineered specifically for the ICP RGS102SFBB0AAA gas furnace and shared across related Heil, Tempstar, and Comfortmaker models that use the same burner and manifold assembly. Always confirm your manifold layout matches before installing.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace front service panel.
3. Document — Photograph the gas valve and bracket orientation before removing anything.
4. Remove — Disconnect the manifold/valve as needed, then unbolt the old bracket from the burner assembly.
5. Install — Mount the new bracket, refit the gas valve in the exact original position, and reconnect per your photo.
6. Test — Restore gas and power, leak-test all joints with soap solution, and verify a clean burner light.

Signs You Need a Replacement

• Gas valve or manifold visibly loose or shifting
• Bracket bent, cracked, or rust-perforated
• Burner rattle or vibration during operation
• Misaligned flames or strain on the gas line connection

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.