ICP Gas Valve Support Bracket for RGS102SEBB0AAA — OEM Mount | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) for the ICP/Tempstar/Heil RGS102SEBB0AAA gas furnace rigidly mounts and aligns the gas valve within the burner compartment. A correct bracket prevents stress on the gas manifold and inlet piping, holds the valve at the proper orientation, and isolates it from blower and combustion vibration. A bent, corroded, or missing bracket allows the gas valve to sag or shift, which can stress threaded fittings, cause manifold misalignment, and risk gas leaks. Restoring the factory bracket keeps the valve secure and the manifold square to the burners.

Specifications

Compatibility

Designed for the ICP/Tempstar/Heil RGS102SEBB0AAA gas furnace and platform models sharing the same burner/manifold layout. Confirm your existing bracket footprint and valve orientation before installing.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power, verify zero voltage with a multimeter, and allow the burner area to cool.
2. Access — Remove the furnace burner compartment service panel.
3. Document — Photograph the valve, manifold, and bracket orientation before disconnecting anything.
4. Remove — Loosen the gas valve and manifold as needed, then unfasten the old bracket.
5. Install — Mount the new bracket, reattach the gas valve to the correct orientation, and torque fittings per spec.
6. Test — Leak-test all gas joints with bubble solution, restore power, and verify normal ignition.

Signs You Need a Replacement

• Gas valve sags, tilts, or vibrates loose
• Bent, cracked, or rusted bracket
• Stressed or leaking manifold/inlet fittings
• Misaligned manifold relative to the burners

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.