ICP Gas Valve Support Bracket for RGS102SEAB0AAA — Manifold Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part number 1178238) is the mounting bracket that secures the gas valve assembly within the ICP RGS102SEAB0AAA furnace. The bracket holds the gas valve and manifold in proper alignment so the burner orifices line up correctly and the valve is not stressed by the weight of the gas piping. A bent, corroded, or missing support bracket can let the gas valve sag, misalign the burners, or place strain on the gas line connections — all of which compromise safe, reliable combustion. This is a direct OEM-fit structural replacement part.

Specifications

Compatibility

This support bracket is the OEM-specified part for the ICP RGS102SEAB0AAA furnace and the matching ICP-built Tempstar, Heil, and Comfortmaker furnaces that share the same gas valve and manifold layout. Confirm the bracket shape against your original before installing.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power, and verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel to reach the gas valve and manifold.
3. Document — Photograph the bracket position and gas valve orientation before removal.
4. Remove — Support the gas valve, remove the bracket fasteners, and take out the old bracket.
5. Install — Fit the new bracket, reattach the gas valve in its original alignment, and torque the fasteners.
6. Test — Restore gas and power, leak-check all gas connections with soap solution, and run a heat cycle.

Signs You Need a Replacement

• Gas valve sags, shifts, or is not securely held in place.
• Bent, cracked, or corroded original bracket.
• Burner-to-orifice misalignment from a failing support.
• Strain or stress visible on the gas line connections.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.