ICP Gas Valve Support Bracket for RGS102LFBB0AAA — OEM Part 1178238 | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part number 1178238) for the ICP / Tempstar / Heil RGS102LFBB0AAA gas furnace. The bracket secures the gas valve to the burner assembly and manifold, holding it in correct alignment with the burners and the inlet/outlet gas piping. A properly mounted gas valve is critical for safe combustion — a loose, corroded, or cracked bracket lets the valve shift, which can stress the gas line connections, misalign the burner flame, and create a potential gas leak point. Replace the bracket whenever it shows rust-through, bent mounting tabs, or if the gas valve no longer sits square against the manifold.

Specifications

Compatibility

Engineered as a direct OEM fit for the ICP RGS102LFBB0AAA furnace and shared chassis variants sold under the Tempstar, Heil, and Comfortmaker brands that use the same gas valve and manifold assembly. Always confirm against your unit's parts diagram before ordering.

Installation Guide

1. Safety First — Shut off the gas supply at the manual shutoff valve and disconnect electrical power. Verify zero voltage with a multimeter.
2. Access — Remove the furnace front service panel to expose the burner and gas valve assembly.
3. Document — Photograph the gas valve, bracket position, and all wire/tubing routing before disconnecting anything.
4. Remove — Disconnect the gas valve wiring and inlet/outlet unions, unbolt the gas valve from the old bracket, then remove the bracket from the burner box.
5. Install — Mount the new bracket, transfer the gas valve, reconnect gas unions, and reconnect wiring exactly per your photos.
6. Test — Restore gas and power, then leak-check every gas joint with soap solution and confirm proper ignition and flame.

Signs You Need a Replacement

• Visible rust, corrosion, or rot-through on the bracket steel
• Gas valve sits loose or shifts when touched
• Bent or stripped mounting tabs that won't hold the valve square
• Stress or leaks at the gas line unions caused by a misaligned valve

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Every order is backed by the National HVAC Parts fitment guarantee. Gas line work should be performed by a licensed HVAC technician.