ICP Gas Valve Support Bracket for RGS102LEBA0AAA — OEM 1178238 | Ships Today

Overview

This is the OEM gas valve support bracket, part number 1178238, for the ICP / Tempstar / Heil RGS102LEBA0AAA gas furnace. The bracket rigidly mounts the gas valve to the burner assembly, holding it in correct alignment with the manifold and gas line so the valve cannot flex, vibrate, or stress the pipe joints during operation. A bent, corroded, or missing bracket allows the valve to shift, which can strain the gas connection and create a potential leak point. Replacing a damaged bracket restores proper, safe valve positioning.

Specifications

Compatibility

Fits the gas valve assembly in the ICP/Tempstar/Heil RGS102LEBA0AAA and related RGS102 series furnaces. Verify the part number stamped on your existing bracket before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power at the switch and breaker, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the valve, bracket, and gas line routing before disassembly.
4. Remove — Disconnect the gas line and valve fasteners, then unbolt the old bracket from the burner assembly.
5. Install — Mount the new bracket, refit the gas valve, and reconnect the gas line with fresh pipe dope on threaded joints.
6. Test — Restore gas and power, then leak-check every joint with soap solution and confirm normal ignition.

Signs You Need a Replacement

• Gas valve is loose, sagging, or misaligned with the manifold
• Bent, cracked, or heavily corroded bracket
• Stress or movement at the gas line connection
• Rattling from the valve during burner operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.