ICP Gas Valve Support Bracket for RGS102LDBB0AAA — OEM Mounting Bracket | Ships Today

Overview

This is the genuine OEM gas valve support bracket, ICP part number 1178219, for the ICP/Tempstar/Heil RGS102LDBB0AAA gas furnace. The bracket holds the gas valve in its correct position within the burner assembly, supporting the weight of the valve and its connected manifold so the gas piping is not stressed and the valve stays properly aligned with the burners. While it is a structural component rather than the valve itself, a bent, corroded, or missing bracket can allow the valve to shift, strain the manifold connections, and create misalignment that affects burner ignition and flame quality. Replace the bracket when servicing or swapping the gas valve, or when the original is damaged or rusted.

Specifications

Compatibility

Fits the ICP/Tempstar/Heil RGS102LDBB0AAA and related RGS-series furnaces using the same valve and manifold layout. Confirm bracket shape and bolt pattern against your existing part before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the furnace service panel and, if required, the burner compartment cover.
3. Document — Photograph the valve, manifold, and bracket orientation before removal.
4. Remove — Support the gas valve, then unfasten and withdraw the old bracket. Avoid loosening gas-tight joints unless necessary.
5. Install — Position the new bracket, refasten the valve, and confirm correct alignment per your photo.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify clean burner ignition.

Signs You Need a Replacement

• Gas valve sags, shifts, or is no longer firmly mounted
• Bent, cracked, or heavily corroded bracket
• Stress or strain visible on the manifold or gas piping
• Burner misalignment or uneven flame after service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.