ICP Gas Valve Support Bracket for RGS102LDAA0AAA — OEM 1178219 | Ships Today

Overview

This is the OEM gas valve support bracket (part number 1178219) for the ICP/Tempstar/Heil RGS102LDAA0AAA gas furnace. The bracket secures the gas valve assembly to the burner box, holding it in correct alignment with the manifold and burner orifices. Proper bracket mounting keeps the valve from vibrating loose, prevents stress on the gas line connections, and maintains the precise gas-to-burner geometry the furnace was designed around. A bent, corroded, or missing bracket can let the valve shift, causing manifold misalignment, gas leaks at the fittings, or rattling during blower operation. This is a direct factory replacement that bolts into the original mounting location with no modification.

Specifications

Compatibility

Designed specifically for the ICP RGS102LDAA0AAA gas furnace and the shared ICP family platforms sold under the Tempstar, Heil, and Comfortmaker names that use this burner box and gas valve arrangement. Always confirm your gas valve model and orientation before ordering.

Installation Guide

1. Safety First — Shut off the gas supply at the manual shutoff valve and disconnect electrical power. Verify zero voltage at the furnace with a multimeter.
2. Access — Remove the furnace front service panel and the burner compartment cover.
3. Document — Photograph the gas valve, bracket, and all wiring/tubing routing before disconnecting anything.
4. Remove — Disconnect the gas valve electrical leads and the union/manifold connection as needed, then unfasten the old bracket from the burner box and gas valve.
5. Install — Mount the gas valve to the new bracket, fasten the bracket to the original burner-box location, and reconnect the manifold and wiring exactly per your photos.
6. Test — Restore gas and power, leak-check every joint with soap solution, and verify a clean ignition and steady flame.

Signs You Need a Replacement

• Gas valve rattles, vibrates, or shifts during operation
• Visible corrosion, cracking, or bending of the original bracket
• Recurring gas-leak detection at the valve or manifold fittings
• Manifold or burner misalignment after service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.