ICP Gas Valve Support Bracket for RGS102HTCB0AAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) for the ICP Tempstar Heil RGS102HTCB0AAA gas furnace holds the gas valve assembly rigidly in place within the burner compartment. A properly mounted gas valve resists vibration and maintains correct alignment between the valve, manifold, and burners — critical for safe, leak-free gas delivery. A bent, corroded, or missing bracket allows the valve and manifold to flex, which can stress gas line connections, misalign burner flames, and create dangerous joint leaks. Symptoms of a failed bracket include a loose or sagging gas valve, manifold movement when the burners cycle, and a faint gas odor at the valve fittings.

Specifications

Compatibility

Designed for the ICP Tempstar Heil RGS102HTCB0AAA gas furnace and related ICP-family models that use this manifold-mounted gas valve support. Confirm the bracket shape and mounting hole pattern against the original before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the gas valve, manifold, and bracket orientation before disturbing anything.
4. Remove — Support the gas valve, remove the fasteners securing the old bracket, and lift it out. Avoid stressing the gas line.
5. Install — Position the new bracket, fasten it to the chassis, and secure the gas valve to it per your photo.
6. Test — Restore gas and power, then leak-check all fittings with soap solution and confirm normal burner ignition.

Signs You Need a Replacement

• Gas valve sags, shifts, or is no longer held firmly
• Bracket is bent, cracked, or corroded
• Manifold or burners move when the valve cycles
• Gas odor detected near the valve mounting joints

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.