ICP Gas Valve Support Bracket for RGS102HRAB0AAA — OEM Mounting Bracket | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part number 1178238) for the ICP / Tempstar / Heil RGS102HRAB0AAA gas furnace. The bracket rigidly anchors the gas valve to the burner assembly so the valve, manifold, and gas line stay properly aligned and do not flex under the weight of the piping or the vibration of normal operation. A missing, bent, or corroded bracket lets the valve sag, which can stress the manifold threads, misalign the burners, and in severe cases contribute to a gas leak at the joints. Replacing a damaged bracket with the correct OEM part restores secure, vibration-free mounting and keeps the gas train geometry exactly as the factory intended.

Specifications

Compatibility

Designed for the ICP-family RGS102HRAB0AAA and related RGS102-series furnaces that use this manifold and gas-valve layout. Confirm the bracket shape and bolt pattern against your existing part before ordering, as ICP uses several bracket profiles across its furnace platforms.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and manifold orientation before loosening anything.
4. Remove — Support the valve, unbolt the old bracket, and detach it from the manifold or cabinet.
5. Install — Position the new bracket, fasten it, and confirm the gas valve sits level and fully supported.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify normal ignition.

Signs You Need a Replacement

• Gas valve sagging or unsupported on the manifold
• Bent, cracked, or corroded existing bracket
• Excessive vibration or rattle at the gas train
• Bracket missing after a prior valve or manifold service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.