ICP Gas Valve Support Bracket for RGS102HDCA0AAA — OEM Mount | Ships Today

Overview

This is the genuine OEM gas valve support bracket, ICP part number 1178219, used to mount and stabilize the gas valve within the burner/manifold assembly of your ICP, Tempstar, or Heil furnace. The bracket holds the gas valve at the correct height and orientation relative to the manifold and burners so the inlet/outlet threads stay aligned and the valve does not sag or vibrate under operation. A correctly secured valve is essential for a leak-free manifold connection and proper burner alignment. This bracket is the part you need when the original has corroded, cracked, or bent — or when you are replacing a gas valve and the old mounting hardware is no longer serviceable. It does not control gas flow itself; it is the structural support for the valve.

Specifications

Compatibility

Direct-fit for ICP/Tempstar/Heil model RGS102HDCA0AAA and related furnace platforms using this manifold layout. Confirm your existing bracket geometry and valve position before installing.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment panel.
3. Document — Photograph the gas valve position, bracket orientation, and pipe connections.
4. Remove — Disconnect the valve as needed, then unbolt the old bracket from the manifold/cabinet.
5. Install — Fasten the new bracket, remount the gas valve, and reconnect the manifold per your photo.
6. Test — Restore gas, leak-test every joint with soap solution, then restore power and verify ignition.

Signs You Need a Replacement

• Corroded, cracked, or bent valve bracket
• Gas valve sagging or shifting in the cabinet
• Misaligned manifold threads at the valve
• Replacing a gas valve with damaged original hardware

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.