ICP Gas Valve Support Bracket for RGS101STAA0AAAA — OEM Mount | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) for the ICP / Tempstar / Heil RGS101STAA0AAAA furnace mounts and stabilizes the gas valve within the burner compartment. It holds the valve in the correct position and orientation, isolating it from vibration and supporting the gas manifold connection so the valve and piping aren't stressed. While this is a mounting component and not the gas valve itself, a bent, corroded, or missing bracket can let the valve shift, strain the gas line, and create leak or alignment problems — so a damaged bracket should be replaced during any gas valve service.

Specifications

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil RGS101STAA0AAAA and related furnaces that use gas valve support bracket 1178238. Confirm bracket shape and mounting hole pattern against your existing part before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect power, then verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel to reach the gas valve and bracket.
3. Document — Photograph the bracket, valve orientation, and manifold connection before disassembly.
4. Remove — Support the gas valve, detach it from the bracket as needed, and unscrew the old bracket.
5. Install — Fasten the new bracket and remount the gas valve in its original orientation.
6. Test — Restore gas and power, leak-check all joints with soap solution, and confirm proper burner operation.

Signs You Need a Replacement

• Bent, cracked, or corroded gas valve bracket
• Gas valve shifting or vibrating loose in the compartment
• Strain or misalignment on the gas manifold connection
• Missing or stripped bracket mounting hardware

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.