ICP Gas Valve Support Bracket for RGS101SRCB0AAA | Ships Today

Overview

This is a genuine OEM gas valve support bracket (part #1178238) for the ICP/Tempstar/Heil RGS101SRCB0AAA gas furnace. The bracket mounts and stabilizes the gas valve inside the burner compartment, holding it in correct alignment with the manifold and gas piping so the valve does not move, vibrate, or place stress on the gas connections. A secure, properly positioned valve is essential for safe, leak-free operation and correct burner alignment. Brackets can corrode, crack, or become bent over years of heat cycling, or go missing during a prior gas valve replacement. Installing the correct OEM support bracket restores the factory mounting geometry and keeps the gas valve firmly in place.

Specifications

Compatibility

Fits the ICP/Tempstar/Heil/Comfortmaker RGS101SRCB0AAA and matched furnace platforms that use this gas valve support bracket. Verify the bracket shape and mounting holes against your existing part before installing.

Installation Guide

1. Safety First — Shut off the gas supply and electrical power, then verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve and bracket position before disturbing anything.
4. Remove — Support the gas valve, then unfasten the old bracket from the valve and cabinet.
5. Install — Fit the new bracket, secure the gas valve in its original alignment, and tighten all fasteners.
6. Test — Restore gas, leak-test all joints with soap solution, then restore power and verify normal ignition.

Signs You Need a Replacement

• Loose gas valve that moves or vibrates in the cabinet
• Corroded, cracked, or bent bracket
• Stress or strain on the gas piping connections
• Missing bracket after a previous valve repair

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.