ICP Gas Valve Support Bracket for RGS101SRBB0AAAA — OEM 1178238 | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part 1178238) for the ICP / Tempstar / Heil RGS101SRBB0AAAA gas furnace. The bracket rigidly mounts the gas valve assembly inside the burner compartment, holding it in correct alignment with the manifold and gas supply so the valve is not stressed by the weight of the piping. A bent, corroded, or missing support bracket can let the gas valve sag, strain the inlet/outlet connections, and create the conditions for a gas leak. Replacing a damaged bracket restores the factory-intended mounting geometry.

Specifications

Compatibility

Designed for the ICP RGS101SRBB0AAAA furnace and shared Tempstar, Heil, and Comfortmaker burner assemblies that use the same gas valve mounting. Verify your existing bracket's hole pattern matches before installing.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect power. Verify zero voltage with a multimeter and confirm the gas is off at the shutoff.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve, bracket, and all wiring before disconnecting.
4. Remove — Disconnect the gas piping unions and electrical leads from the valve, then unfasten the old bracket.
5. Install — Mount the new bracket, refit the gas valve, and reconnect piping and wiring per your photo.
6. Test — Restore gas and power, then leak-check every joint with soap solution and verify ignition.

Signs You Need a Replacement

• Gas valve sagging or loose in the cabinet
• Cracked, bent, or rusted bracket
• Strain or stress visible on the gas piping connections
• Soap-test bubbles at valve fittings caused by misalignment

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.