ICP Gas Valve Support Bracket for RGS101SRBA0AAAA — OEM Mount | Ships Today

Overview

This is the genuine OEM gas valve support bracket (P/N 1178238) for the ICP / Tempstar / Heil RGS101SRBA0AAAA gas furnace. The bracket mounts the gas valve assembly to the burner box and manifold, holding the valve in precise alignment with the gas line and burner orifices. Correct valve position is essential for safe combustion: a loose or missing bracket lets the valve and manifold shift, which can strain the gas piping, misalign burner flames, and create stress on the inlet/outlet threaded connections where leaks begin. While the bracket carries no electrical or gas-metering function itself, it is a safety-critical structural part. Symptoms of a failed or absent bracket include a gas valve that moves when touched, audible vibration from the burner compartment, and uneven or lifting burner flames.

Specifications

Compatibility

Designed for the ICP family RGS101SRBA0AAAA furnace and shared across compatible Tempstar, Heil, and Comfortmaker models using the same gas valve and manifold layout. Verify your manifold configuration before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and wiring before disconnecting anything.
4. Remove — Disconnect the valve wiring, loosen the manifold/valve fasteners, and remove the old bracket.
5. Install — Mount the new bracket, reattach the gas valve in its original position, and torque connections per spec.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify a clean, even burner flame.

Signs You Need a Replacement

• Gas valve moves or wobbles when touched
• Rattling or buzzing from the burner compartment
• Visibly bent, cracked, or corroded bracket
• Uneven or lifting burner flames

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee. Gas components should be installed by a licensed HVAC technician.