ICP Gas Valve Support Bracket for RGS101SEBB0AAAA — OEM 1178238 | Ships Today

Overview

This OEM gas valve support bracket (part number 1178238) secures the gas valve assembly inside the burner compartment of your ICP / Tempstar / Heil furnace. The bracket holds the valve in proper alignment with the manifold and burners, preventing vibration, stress on the gas line connections, and movement during ignition cycles. A bent, corroded, or missing bracket can allow the gas valve to shift, stressing the manifold pipe joint and creating a potential gas leak point. This is a direct-fit OEM replacement stamped from coated steel for corrosion resistance.

Specifications

Compatibility

Fits ICP, Tempstar, Heil, and Comfortmaker gas furnaces using the RGS101SEBB0AAAA platform and related RGS-series models. Always verify your part number against the existing bracket before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace burner/service panel.
3. Document — Photograph the gas valve, bracket, and all wiring before disconnecting.
4. Remove — Loosen the gas valve from the manifold if required, then remove the screws holding the old bracket.
5. Install — Mount the new bracket, re-secure the gas valve in alignment with the manifold, and reconnect everything per your photo.
6. Test — Restore gas and power, then leak-check all joints with soap solution and confirm normal ignition.

Signs You Need a Replacement

• Gas valve loose or shifting in the burner box
• Visible rust, cracking, or bending on the existing bracket
• Stress or strain visible at the manifold pipe joint
• Rattling or vibration noise during burner operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.