ICP Gas Valve Support Bracket for RGS101LSCA0AAA — Furnace Mounting Hardware | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) for the ICP/Tempstar/Heil RGS101LSCA0AAA gas furnace holds the gas valve assembly rigidly in position relative to the burner manifold. A properly supported gas valve keeps the inlet and outlet gas connections aligned and stress-free, preventing strain on the threaded fittings that can lead to gas leaks or cracked unions. Over years of thermal cycling, the original bracket can corrode, bend, or fatigue, allowing the valve to sag and stress the manifold pipe. This factory replacement restores correct valve alignment and a leak-free, code-compliant installation.

Specifications

Compatibility

Fits the ICP RGS101LSCA0AAA furnace and related ICP-family gas furnaces that use this manifold-mounted gas valve configuration. Confirm your gas valve mounting layout matches before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power, then verify zero voltage with a multimeter.
2. Access — Remove the furnace front service panel to expose the burner and gas valve assembly.
3. Document — Photograph the gas valve, bracket, and all wiring and tubing before disconnecting.
4. Remove — Disconnect the valve from the manifold as needed, then unbolt and remove the old bracket.
5. Install — Mount the new bracket, reattach the gas valve, and ensure the inlet/outlet connections are aligned and tight.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify ignition.

Signs You Need a Replacement

• Gas valve sagging or shifting on the manifold
• Rusted, bent, or cracked support bracket
• Stress or leaks at the manifold gas fittings
• Bracket missing after a prior repair or valve swap

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.