ICP Gas Valve Support Bracket for RGS101LSAB0AAAA — OEM 1178219 | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part number 1178219) for the ICP/Tempstar/Heil RGS101LSAB0AAAA gas furnace. The bracket holds the gas valve firmly to the burner assembly, keeping it aligned with the manifold and burner ports so it stays put under vibration and repeated heating cycles. A corroded, cracked, or missing bracket allows the gas valve to sag, stressing the manifold joint, misaligning the burners, and causing rough or unstable ignition. Installing fresh mounting hardware restores a safe, factory-spec gas train.

Specifications

Compatibility

Engineered for the ICP family RGS101LSAB0AAAA furnace and matching gas valve assemblies sold under the ICP, Tempstar, Heil, and Comfortmaker brands. Confirm your model and the part number stamped on the original bracket before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the furnace burner/service panel.
3. Document — Photograph the gas valve, manifold, and bracket position before disconnecting.
4. Remove — Support the gas valve, remove the screws holding the old bracket, and detach it.
5. Install — Mount the new bracket, re-secure the gas valve in its original orientation, and confirm manifold alignment.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify a clean ignition.

Signs You Need a Replacement

• Gas valve sags or shifts out of alignment
• Visible cracks, rust, or bent metal on the bracket
• Rattling or buzzing from the gas valve during operation
• Manifold or burner misalignment after service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.