ICP Gas Valve Support Bracket for RGS101LRCA0AAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket, part number 1178219, secures and aligns the gas valve assembly inside the ICP/Heil/Tempstar RGS101LRCA0AAA furnace. The bracket holds the valve rigid so the manifold, gas line, and burner orifices stay in proper alignment and so vibration during firing does not stress the threaded gas connections. A bent, corroded, or missing support bracket can allow the gas valve to sag or shift, which strains the manifold joint and risks a gas leak or misaligned burner flame. This is a direct OEM replacement bracket — install it whenever you replace the gas valve or find the original bracket damaged.

Specifications

Compatibility

Fits the gas valve and manifold assembly used in the ICP/Heil/Tempstar RGS101LRCA0AAA furnace and related chassis sharing the 1178219 bracket. Verify your existing bracket part number before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the bracket position and gas valve orientation before removing anything.
4. Remove — Loosen the valve from the bracket if needed, then unfasten and withdraw the old bracket.
5. Install — Mount the new bracket, reseat the gas valve, and reconnect the manifold per your photos.
6. Test — Restore gas and power, leak-test all joints with soap solution, and confirm a clean burner ignition.

Signs You Need a Replacement

• Gas valve sags, shifts, or vibrates loosely during operation
• Bracket is bent, cracked, or rust-corroded
• Manifold or gas-line joint shows stress or a detectable leak
• Burner flame is misaligned due to a shifted valve

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.