ICP Gas Valve Support Bracket for RGS101LFCA0AAA | Ships Today

Overview

This OEM gas valve support bracket (part #1178238) mounts and stabilizes the gas valve assembly inside the ICP, Heil, and Tempstar RGS101LFCA0AAA furnace. It holds the valve and manifold in correct alignment with the burners so the gas train stays rigid, leak-free, and properly positioned against vibration during burner operation. A bent, corroded, or missing bracket allows the valve and manifold to flex, which stresses the pipe joints, can misalign the burner orifices, and risks a gas leak. Replace the bracket whenever it is damaged or when servicing the gas valve.

Specifications

Compatibility

Designed for the ICP/Heil/Tempstar RGS101LFCA0AAA furnace and platform models using the 1178238 gas valve bracket. Confirm your model and bracket part number before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect power; verify zero voltage with a multimeter.
2. Access — Remove the burner/service panel.
3. Document — Photograph the bracket, valve, and manifold positions before disassembly.
4. Remove — Support the gas valve, remove the mounting fasteners, and take out the old bracket.
5. Install — Fit the new bracket, reattach the valve/manifold, and torque fasteners so the gas train is rigid.
6. Test — Restore gas and power, then leak-check all joints with soap solution and run a heat cycle.

Signs You Need a Replacement

• Gas valve or manifold moves or sags
• Bent, cracked, or corroded bracket
• Stress or weeping at gas pipe joints
• Misaligned burners or uneven flame

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.