ICP Gas Valve Support Bracket for RGS101LEAA0AAAA — OEM 1178238 | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part 1178238) for the ICP / Tempstar / Heil RGS101LEAA0AAAA gas furnace. The bracket rigidly mounts the gas valve to the burner assembly, holding it in correct alignment with the manifold and burner inlet so the gas connections stay leak-free and the valve does not flex under the weight of the piping. A bent, cracked, or corroded bracket lets the gas valve sag or vibrate, which stresses the threaded gas joints and can cause manifold misalignment, rough ignition, or a gas leak. Replacing a damaged bracket restores proper valve positioning and protects the integrity of the gas train.

Specifications

Compatibility

Designed for the ICP-built RGS101LEAA0AAAA furnace and related ICP, Tempstar, Heil, and Comfortmaker gas furnaces that use this burner/manifold layout. Match the bracket geometry and mounting holes to your existing part before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power at the furnace switch, and verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and all wiring/piping before disassembly.
4. Remove — Disconnect the gas valve wiring, carefully unthread the valve from the manifold, and unbolt the old support bracket.
5. Install — Bolt the new bracket in place, remount the gas valve with fresh thread sealant rated for gas, and reconnect wiring per your photo.
6. Test — Restore gas and power, leak-test all joints with soap solution, and verify clean ignition.

Signs You Need a Replacement

• Bent, cracked, or corroded bracket
• Gas valve sagging or vibrating loose from the manifold
• Stressed or weeping gas joints at the valve
• Rough ignition traced to manifold misalignment

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.