ICP Gas Valve Support Bracket for RGS101LDCA0AAA — OEM 1178219 | Ships Today

Overview

This is the OEM gas valve support bracket (part number 1178219) for the ICP/Tempstar/Heil RGS101LDCA0AAA furnace. The bracket secures the gas valve assembly inside the burner compartment, holding it in correct alignment with the manifold and inlet/outlet piping so the valve does not vibrate, sag, or stress the gas connections during operation. A loose, corroded, or missing bracket can let the gas valve shift, creating strain on the pipe joints and potential gas leaks. Using the factory bracket guarantees the valve sits at the exact height and angle the manifold was engineered for.

Specifications

Compatibility

Designed for the ICP/Tempstar/Heil RGS101LDCA0AAA gas furnace and related RGS series platforms that share the same burner box and gas valve mounting geometry. Always confirm your model and serial label before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power, then verify zero voltage with a multimeter.
2. Access — Remove the furnace service panel to expose the burner and gas valve assembly.
3. Document — Photograph the gas valve, piping, and bracket orientation before removing anything.
4. Remove — Loosen the manifold/valve fasteners as needed and unbolt the old bracket from the burner box.
5. Install — Mount the new bracket, reattach the gas valve, and torque the gas connections per spec.
6. Test — Restore gas and power, leak-check every joint with soap solution, and verify a clean ignition cycle.

Signs You Need a Replacement

• Gas valve sags, rattles, or vibrates during operation
• Visible rust, cracking, or bent metal on the existing bracket
• Strain or movement at the gas pipe connections
• Bracket missing after a prior repair

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.