ICP Gas Valve Support Bracket for RGS101LDAA0AAAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part 1178219) for the ICP/Tempstar/Heil RGS101LDAA0AAAA furnace holds the gas valve assembly firmly in position within the burner compartment. A secure mounting bracket prevents stress on the gas piping and manifold connections, reduces vibration, and keeps the valve correctly aligned with the burners. Brackets are often bent, corroded, or discarded during a gas valve swap; using the correct OEM support ensures the valve and manifold are properly supported and that no strain is placed on the gas connections.

Specifications

Compatibility

Designed for the gas valve assembly in the ICP/Tempstar/Heil/Comfortmaker RGS101LDAA0AAAA and related RGS-series gas furnaces. Verify against your unit's parts breakdown before ordering.

Installation Guide

1. Safety First — Disconnect power, verify zero voltage with a multimeter, and shut off the gas supply at the manual valve.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the bracket position and how the gas valve mounts to it before removal.
4. Remove — Support the gas valve, then remove the screws holding the old bracket to the cabinet.
5. Install — Position the new bracket, fasten it to the cabinet, and remount the gas valve per your photo.
6. Test — Restore gas, leak-check all joints with soap solution, restore power, and verify a normal heat cycle.

Signs You Need a Replacement

• Gas valve is loose or sagging in the compartment
• Bent, cracked, or corroded original bracket
• Strain visible on the gas manifold or piping
• Rattling or vibration from the valve during operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.