ICP Gas Valve Support Bracket for RGS101HSAA0AAAA — OEM 1178219 | Ships Today

Overview

This is the OEM gas valve support bracket (part number 1178219) for the ICP / Tempstar / Heil RGS101HSAA0AAAA gas furnace. The bracket holds the gas valve assembly firmly against the burner manifold, maintaining the factory alignment between the valve, manifold, and burners despite operating vibration. When the bracket is bent, rusted, or missing, the gas valve can shift and stress the manifold joint, leading to potential gas leaks and unreliable burner ignition. Installing a new bracket restores the correct mounting geometry and keeps the gas train rigid and safe.

Specifications

Compatibility

Engineered as a direct OEM fit for the ICP Tempstar Heil RGS101HSAA0AAAA gas furnace and shared-platform models in the same family. Always confirm your model number and the existing bracket part number before ordering.

Installation Guide

1. Safety First — Shut off the gas at the manual shutoff valve, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the gas valve, manifold, and bracket position before disconnecting anything.
4. Remove — Disconnect the gas valve from the manifold as needed, remove the screws holding the old bracket, and lift it out.
5. Install — Mount the new bracket in the original location, reattach the gas valve, and torque all fasteners per the photo.
6. Test — Restore gas and power, leak-check every joint with soap solution, and verify a clean burner ignition cycle.

Signs You Need a Replacement

• Gas valve sits loose, tilted, or rattles during operation
• Visible rust, cracking, or bending on the existing bracket
• Soap-test bubbles at the manifold from a shifting valve
• Burner flame instability traced to manifold misalignment

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.