ICP Gas Valve Support Bracket for RGS101HRBA0AAAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part #1178238) is the original mounting hardware that secures the gas valve assembly inside the ICP/Heil/Tempstar RGS101HRBA0AAAA furnace. The bracket positions and supports the gas valve so its weight and the rigidity of the gas line do not stress the valve body or the threaded manifold connection. A bent, corroded, or missing support bracket lets the valve and manifold flex during operation and handling, which over time can loosen gas-tight joints and create a leak hazard. Replacing the bracket during a gas valve service ensures the new valve is mounted exactly as the factory intended, keeping the burner-to-valve alignment correct and the assembly rigid.

Specifications

Compatibility

Direct-fit OEM replacement bracket for the ICP/Heil/Tempstar/Comfortmaker RGS101HRBA0AAAA and related RGS101 furnaces that use this gas valve mounting arrangement. Verify your model tag before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power, then verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the bracket, valve orientation, and gas line routing before disassembly.
4. Remove — Disconnect the gas line union if required, unbolt the old bracket, and lift it clear of the valve.
5. Install — Position the new bracket, fasten it to the cabinet, and secure the gas valve to it per your photo.
6. Test — Restore gas, leak-check all joints with soap solution, restore power, and confirm normal heating operation.

Signs You Need a Replacement

• Gas valve flexes or moves when light pressure is applied
• Bent, cracked, or corroded bracket
• Stress on the gas manifold or valve threads
• Bracket replaced as part of a full gas valve swap

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.