ICP Gas Valve Support Bracket for RGS101HFAB0AAAA — OEM 1178238 | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) is the factory mounting bracket that secures the gas valve assembly within the ICP/Tempstar/Heil RGS101HFAB0AAAA furnace. The bracket holds the valve rigidly to the burner manifold so gas-train connections stay aligned and stress-free, preventing vibration and leaks at the threaded joints. A bent, corroded, or missing bracket can let the valve sag and put strain on the gas piping — replace it whenever the gas valve is serviced or removed. Note: this is the support bracket only, not the gas valve itself.

Specifications

Compatibility

Engineered for the ICP family model RGS101HFAB0AAAA and related Tempstar, Heil, and Comfortmaker gas furnaces using the same gas-train layout. Confirm the bracket footprint and hole pattern against your existing part before installing.

Installation Guide

1. Safety First — Shut off the manual gas supply, disconnect power, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve, bracket, and piping orientation before disturbing anything.
4. Remove — Support the gas valve, then unfasten and withdraw the old bracket.
5. Install — Position the new 1178238 bracket and secure the gas valve per your photo, keeping the gas-train alignment true.
6. Test — Restore gas, leak-check all joints with soapy solution, restore power, and verify a clean ignition cycle.

Signs You Need a Replacement

• Gas valve sagging or unsupported on the manifold.
• Bent, cracked, or heavily corroded original bracket.
• Strain or stress visible at the gas-train threaded connections.
• Bracket damaged during a prior gas valve replacement.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.