ICP Gas Valve Support Bracket for RGS091STBB0AAAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part #1178238) is the mounting bracket that holds the gas valve in position within the ICP/Tempstar/Heil RGS091STBB0AAAA furnace burner assembly. The bracket fixes the valve at the correct height and orientation so the gas manifold lines up with the burners and the valve is not stressed by the weight of the piping. A bent, corroded, or missing bracket allows the gas valve and manifold to sag or vibrate, which can misalign the burners and place strain on the gas connections. Replace the bracket whenever it is damaged, rusted through, or absent after service.

Specifications

Compatibility

Supplied as the factory-correct support bracket for the ICP/Tempstar/Heil model RGS091STBB0AAAA and matching furnace burner assemblies. Confirm the bracket part number and gas valve orientation against your unit before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power at the switch and breaker, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve, manifold, and bracket position before disassembly.
4. Remove — Support the gas valve, then unfasten the old bracket from the cabinet and valve.
5. Install — Mount the new bracket and re-secure the gas valve in its original position per your photo, keeping the manifold aligned.
6. Test — Restore gas and power, leak-check all gas connections with soap solution, and confirm normal burner operation.

Signs You Need a Replacement

• Bent, cracked, or rusted-through bracket
• Gas valve or manifold sagging out of alignment
• Excessive vibration of the valve during operation
• Bracket missing or unusable after prior service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.