ICP Gas Valve Support Bracket for RGS091SFBB0AAAA — OEM 1178238 | Ships Today

Overview

This OEM gas valve support bracket (part number 1178238) is the mounting bracket that secures the gas valve assembly inside the ICP / Tempstar / Heil RGS091SFBB0AAAA gas furnace. The bracket holds the gas valve in its correct position and orientation relative to the manifold and burner assembly, preventing strain on the gas piping and keeping the valve stable against vibration during operation. A bent, corroded, or missing bracket can allow the valve to shift, stress the manifold connections, and create a potential gas-leak or alignment hazard. Replacing it with the correct OEM bracket restores safe, secure valve mounting.

Specifications

Compatibility

Direct OEM replacement for the ICP / Tempstar / Heil RGS091SFBB0AAAA gas furnace. Confirm the bracket geometry matches your manifold and gas valve layout before installing, as ICP uses different brackets across burner platforms.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power at the switch and breaker, and verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the gas valve, manifold, and bracket position before loosening anything.
4. Remove — Support the gas valve, remove the bracket fasteners, and lift out the old bracket.
5. Install — Fit the new bracket, reposition the gas valve to spec, and tighten all fasteners.
6. Test — Restore gas and power, then leak-check every gas joint with soap solution before running a heat cycle.

Signs You Need a Replacement

• Loose, shifting, or vibrating gas valve assembly
• Bent, cracked, or rusted bracket
• Strain or misalignment at the manifold connection
• Bracket damaged or missing after prior service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.