ICP Gas Valve Support Bracket for RGS091SFAA0AAAA Furnace — OEM Mount | Ships Today

Overview

This is the OEM gas valve support bracket (OEM 1178238) for the ICP Tempstar Heil RGS091SFAA0AAAA gas furnace. The bracket rigidly mounts the gas valve to the burner assembly so the valve, manifold, and gas piping stay properly aligned and supported against vibration. This is a structural mounting bracket — it is not the gas valve itself. It is needed when the original bracket is bent, cracked, or corroded, or when servicing the gas valve leaves the mounting hardware damaged. A properly supported valve is critical for safe manifold alignment and leak-free joints.

Specifications

Compatibility

Fits the ICP Tempstar Heil RGS091SFAA0AAAA furnace and equivalent RGS091 units built under the ICP, Heil, Tempstar, and Comfortmaker badges that specify OEM bracket 1178238.

Installation Guide

1. Safety First — Shut off the gas supply and electrical disconnect. Verify zero voltage and confirm the gas is off before working near the valve.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the bracket, valve orientation, and manifold position before disturbing anything.
4. Remove — Support the gas valve, remove the fasteners holding the old bracket, and lift the damaged bracket out without straining the gas piping.
5. Install — Position the new bracket, refasten the valve to it in the original orientation, and confirm the manifold alignment is unchanged.
6. Test — Restore gas and power, then leak-check all gas joints with soap solution and confirm normal ignition.

Signs You Need a Replacement

• Bent, cracked, or corroded original bracket
• Gas valve loose or sagging at the manifold
• Misaligned manifold or strained gas piping
• Bracket damaged during gas valve service

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.