ICP Gas Valve Support Bracket for RGS091SEAB0AAAA — OEM 1178238 | Ships Today

Overview

This OEM gas valve support bracket (part number 1178238) secures and stabilizes the gas valve assembly inside your ICP Tempstar Heil RGS091SEAB0AAAA furnace. The bracket holds the valve in correct alignment with the manifold and burner assembly, preventing stress on the gas line connections and ensuring the valve stays seated through thermal cycling and vibration. A cracked, corroded, or missing bracket allows the valve to sag or shift, which can stress threaded pipe joints and create gas leaks or misalignment with the burners. Replacing a damaged bracket restores the factory mounting geometry the heating system was designed around.

Specifications

Compatibility

Designed as a direct OEM fit for the ICP Tempstar Heil RGS091SEAB0AAAA furnace and other ICP-family models sharing the same gas valve and manifold layout. Always confirm your part number matches before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power. Verify zero voltage with a multimeter.
2. Access — Remove the furnace service panel to expose the gas valve and manifold.
3. Document — Photograph the bracket position, valve orientation, and any wiring before disconnecting.
4. Remove — Disconnect the gas valve if required, then remove the fasteners holding the old bracket and lift it out.
5. Install — Position the new bracket, secure with the original fasteners, and re-seat the gas valve to its mark.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify a clean ignition cycle.

Signs You Need a Replacement

• Gas valve sags, rattles, or moves when touched
• Visible cracks, bends, or rust on the existing bracket
• Stress or leaks at the gas pipe threads near the valve
• Valve misaligned with the manifold or burners

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.