ICP Gas Valve Support Bracket for RGS091LSBB0AAAA — OEM Mounting Bracket | Ships Today

Overview

This genuine OEM gas valve support bracket (part #1178219) for the ICP (International Comfort Products) RGS091LSBB0AAAA gas furnace holds the gas valve assembly rigidly in place within the burner compartment. A properly mounted gas valve resists vibration and stress on the gas line connections, which protects against gas leaks and keeps the valve aligned with the manifold and burners. If the original bracket is bent, corroded, or missing, the valve can sag or shift — stressing pipe joints, causing pilot/ignition problems, and creating a potential safety hazard. This is a direct-fit structural replacement, not the valve itself.

Specifications

Compatibility

Designed as a direct OEM fit for the ICP / Heil / Tempstar RGS091LSBB0AAAA gas furnace and related ICP-family models using the same gas valve mounting configuration. Verify your existing bracket geometry before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace service/burner panel to reach the gas valve and bracket.
3. Document — Photo the valve, gas line routing, and bracket position before disconnecting anything.
4. Remove — Carefully unthread the gas valve from the manifold if required, then unbolt the old bracket from the cabinet.
5. Install — Mount the new support bracket, reattach the gas valve, and reconnect the gas line using approved pipe sealant.
6. Test — Restore gas and power, then leak-check all joints with soap solution and verify normal ignition.

Signs You Need a Replacement

• Bent, cracked, or rusted-through bracket
• Gas valve sagging or moving when touched
• Stress or strain visible on gas line connections
• Rattling or buzzing from a loose valve during operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.