ICP Gas Valve Support Bracket for RGS091HRCB0AAA | Ships Today

Overview

This OEM gas valve support bracket (OEM 1178238) is the mounting bracket that secures the gas valve and stabilizes the manifold assembly on your ICP/Heil/Tempstar RGS091HRCB0AAA packaged gas unit. It holds the valve rigidly in place so the burner manifold, supply piping, and valve body stay aligned, preventing stress on the gas connections and reducing vibration. A missing, bent, or corroded bracket can let the gas valve shift, stressing the pipe joints and inlet — a safety concern on any gas-fired appliance.

Specifications

Compatibility

Direct fit for ICP RGS091HRCB0AAA and compatible across Heil, Tempstar, Comfortmaker, and ICP-family packaged gas units that use this gas valve mounting bracket. Verify the bracket footprint and valve hole pattern match your assembly.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect power, verify zero voltage with a multimeter.
2. Access — Remove the burner/service panel.
3. Document — Photograph the bracket position and valve orientation before disturbing the assembly.
4. Remove — Support the gas valve, then unfasten the old bracket from the cabinet/manifold.
5. Install — Position the new bracket and fasten the gas valve securely, keeping the manifold aligned.
6. Test — Restore gas and power, then leak-check all joints with soap solution and confirm normal ignition.

Signs You Need a Replacement

• Gas valve shifts or feels loose on the manifold
• Bent, cracked, or corroded bracket
• Stress or strain visible on gas supply joints
• Excessive vibration at the valve during operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.