ICP Gas Valve Support Bracket for RGS091HRCA0AAA — OEM Mounting Hardware | Ships Today

Overview

This OEM gas valve support bracket (part #1178238) holds the gas valve assembly in its correct position inside your ICP Tempstar Heil RGS091HRCA0AAA furnace. The bracket maintains proper alignment between the gas valve, manifold, and burners, and isolates the valve from manifold stress and vibration. A bent, corroded, or missing bracket can let the valve sag, putting strain on the gas line connections and burner alignment — which can cause improper combustion or gas leaks at threaded joints. Replacing the bracket restores the factory-specified mounting geometry and keeps the gas train rigid and safe.

Specifications

Compatibility

Designed for the ICP RGS091HRCA0AAA gas furnace and related ICP, Tempstar, Heil, and Comfortmaker models using the same gas valve and manifold layout. Verify the bracket profile matches your existing part before installing.

Installation Guide

1. Safety First — Shut off the gas supply and electrical power; verify zero voltage with a multimeter.
2. Access — Remove the burner compartment panel.
3. Document — Photograph the bracket and gas valve orientation before disturbing the gas train.
4. Remove — Support the valve, then remove the screws securing the old bracket to the manifold and cabinet.
5. Install — Position the new bracket, fasten it to factory torque, and confirm the valve sits square with no strain on the gas line.
6. Test — Restore gas and power, then leak-test all joints with bubble solution and run a heat cycle.

Signs You Need a Replacement

• Gas valve sags or is loose on the manifold
• Bracket is bent, cracked, or heavily corroded
• Stress or strain visible on gas line connections
• Burner-to-valve alignment is off

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.