ICP Gas Valve Support Bracket for RGS091HRBA0AAAA — OEM 1178238 | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) is the factory mounting bracket that anchors the gas valve assembly inside the ICP/Heil/Tempstar RGS091HRBA0AAAA gas furnace. The bracket holds the gas valve in correct alignment with the manifold and burner assembly, preventing strain on the gas piping and keeping the valve rigidly positioned against the vibration of the inducer and blower. A bent, corroded, or missing support bracket can allow the gas valve and manifold to shift, stressing the threaded connections and creating a potential gas-leak or misfire condition. Replacing a damaged bracket during a valve or manifold service restores the proper, secure mounting the furnace was engineered for.

Specifications

Compatibility

Designed as the factory gas valve support bracket for the ICP RGS091HRBA0AAAA gas furnace and the matching Heil, Tempstar, and Comfortmaker models built on the same burner and manifold platform.

Installation Guide

1. Safety First — Shut off the gas at the manual valve and disconnect power. Verify zero voltage with a multimeter.
2. Access — Remove the burner/service panel to reach the gas valve and manifold.
3. Document — Photo the bracket position, valve orientation, and piping before disconnecting.
4. Remove — Support the gas valve, then remove the fasteners holding the old bracket and lift it out.
5. Install — Mount the new bracket, secure the gas valve to it, and confirm alignment with the manifold per your photo.
6. Test — Restore gas, leak-check all joints with approved solution, restore power, and verify a normal heating cycle.

Signs You Need a Replacement

• Bent, cracked, or corroded valve bracket
• Gas valve that shifts or vibrates loose
• Stress or strain visible on the gas piping connections
• Bracket damaged or discarded during a prior valve service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.