ICP Gas Valve Support Bracket for RGS091HRAB0AAAA — OEM Mount | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part #1178238) for the ICP / Heil / Tempstar RGS091HRAB0AAAA gas furnace. The bracket holds the gas valve and manifold assembly in the correct position relative to the burners, preventing strain on the gas line and keeping the valve aligned for proper combustion. A bent, cracked, or missing support bracket can allow the valve to sag, stress the inlet piping, and create a potential gas leak point. Replacing the bracket with the factory part restores secure, code-correct mounting of the gas train.

Specifications

Compatibility

Designed for the ICP / Heil / Tempstar / Comfortmaker RGS091HRAB0AAAA gas furnace and related RGS-series furnaces that use the same gas-train layout. Confirm your existing bracket geometry before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power at the switch and breaker, and verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the gas valve, manifold, and bracket orientation before loosening anything.
4. Remove — Support the gas valve, remove the fasteners holding the old bracket, and lift it out.
5. Install — Position the new bracket, refasten it to the furnace, and re-secure the gas valve per your photo.
6. Test — Restore gas and power, then leak-check all joints with soap solution and verify normal ignition.

Signs You Need a Replacement

• Gas valve sags or is no longer firmly supported
• Bent, cracked, or rusted-through bracket
• Strain or stress visible on the gas inlet piping
• Rattling or movement of the manifold during operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.