ICP Gas Valve Support Bracket for RGS091HEBA0AAAA — OEM Hardware Kit | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part numbers 1178219 and 1178238) for the ICP Tempstar/Heil RGS091HEBA0AAAA gas furnace. The bracket anchors the gas valve assembly to the burner manifold, holding the valve in firm alignment so the inlet and outlet gas connections remain leak-free and the valve does not vibrate during ignition and shutdown. A corroded, bent, or missing bracket allows the valve to move, stressing the pipe threads and creating rattle in the burner compartment. Installing a sound bracket restores correct valve positioning and protects the threaded gas joints.

Specifications

Compatibility

Designed specifically for the ICP / Tempstar / Heil RGS091HEBA0AAAA gas furnace and closely related RGS091 platform models sharing the same burner and manifold assembly. Confirm your model and serial number before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power. Verify zero voltage with a multimeter before touching any wiring.
2. Access — Remove the furnace service/burner door to reach the gas valve and manifold.
3. Document — Photograph the bracket position, fasteners, and nearby wiring before disconnecting.
4. Remove — Support the gas valve, then remove the screws holding the old bracket without disturbing the gas piping threads.
5. Install — Position the new bracket, align the valve, and reinstall the fasteners snugly without over-torquing.
6. Test — Restore gas and power, leak-check all gas joints with soapy solution, and confirm normal ignition and burner operation.

Signs You Need a Replacement

• Gas valve shifts, sags, or vibrates loose during firing
• Rattling or buzzing from the burner compartment
• Visible rust, cracking, or a bent/missing bracket
• Stress on the gas line threads or a slow gas joint leak

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.