ICP Gas Valve Support Bracket for RGS091HEAA0AAAA — OEM Mounting | Ships Today

Overview

This OEM gas valve support bracket set for the ICP / Tempstar / Heil RGS091HEAA0AAAA (part #1178219 and #1178238) secures the gas valve and manifold assembly inside the burner compartment. The bracket holds the valve in correct alignment with the burners and manifold, preventing strain on the gas piping and keeping the valve from shifting under thermal cycling and vibration. A bent, corroded, or missing support bracket can allow the gas valve to sag, stress the threaded connections, and create the conditions for a gas leak or misaligned burners. Replacing the bracket during a gas valve service ensures the assembly is mounted to factory specification.

Specifications

Compatibility

Built for the ICP RGS091HEAA0AAAA furnace and shared-chassis Tempstar, Heil, Comfortmaker, and Day & Night models. Verify your bracket part number against the unit before ordering.

Installation Guide

1. Safety First — Disconnect power, verify zero voltage with a multimeter, and shut off the gas supply at the valve.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve, piping, and bracket orientation before disassembly.
4. Remove — Support the gas valve, remove the bracket fasteners, and lift out the old bracket.
5. Install — Position the new bracket, secure the gas valve to it, and reconnect per your photo. Do not over-torque gas connections.
6. Test — Restore gas and power, leak-check all joints with soap solution, and confirm proper burner ignition.

Signs You Need a Replacement

• Gas valve sagging or loose in the cabinet
• Bent, cracked, or rusted support bracket
• Stress or strain visible on the gas piping
• Misaligned burners or manifold

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.