ICP Gas Valve Support Bracket for RGS091HDBB0AAAA — OEM Mounting | Ships Today

Overview

This OEM gas valve support bracket (part 1178219) for the ICP Tempstar Heil RGS091HDBB0AAAA gas furnace holds the gas valve in its factory position and alignment within the burner compartment. The bracket carries the weight of the valve and manifold so the gas piping is not stressed, keeping threaded connections leak-free and the burner orifices correctly aimed. A bent, corroded, or missing support bracket allows the gas valve to sag or vibrate, which can loosen pipe joints, misalign the manifold over the burners, and create a potential gas leak hazard. Replacing a damaged bracket restores correct, safe valve mounting to OEM specification.

Specifications

Compatibility

Fits the ICP Tempstar Heil RGS091HDBB0AAAA gas furnace and related RGS-series models using the same gas valve and manifold layout. Confirm bracket geometry against the original before installing.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect power, then verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve, manifold, and bracket position before disconnecting anything.
4. Remove — Support the gas valve, then remove the fasteners holding the old bracket.
5. Install — Mount the new bracket, reattach the gas valve to the correct alignment per your photo, and tighten all fasteners.
6. Test — Restore gas, leak-check all joints with soap solution, then restore power and verify ignition.

Signs You Need a Replacement

• Gas valve sags, tilts, or vibrates in operation
• Bent, cracked, or corroded bracket
• Soap-test bubbles at manifold joints from valve movement
• Misaligned burner flames caused by a shifted manifold

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.