ICP Gas Valve Support Bracket for RGS090SRBA0AAA | Ships Today

Overview

This OEM gas valve support bracket (part number 1178238) is the mounting bracket that secures the gas valve assembly inside the ICP Tempstar Heil RGS090SRBA0AAA gas furnace. The bracket holds the gas valve rigidly in the correct position so that the valve, manifold, and burner orifices stay properly aligned and the gas piping is not stressed. A solid mount is a safety essential: a loose or corroded bracket lets the gas valve and manifold shift, which can misalign the burners, strain the gas connections, and create the conditions for a leak. If your original bracket is rusted, cracked, or bent — or was damaged during a previous valve replacement — installing a fresh OEM bracket restores secure, vibration-free support for the gas valve.

Specifications

Compatibility

Designed for the ICP Tempstar Heil RGS090SRBA0AAA gas furnace and related ICP-family models using gas valve support bracket 1178238. Match the bracket geometry and mounting holes to your original before installing.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the bracket and gas valve mounting before disassembly.
4. Remove — Support the gas valve, remove the fasteners holding the old bracket, and take out the damaged bracket.
5. Install — Position the new bracket, secure the gas valve to it, and tighten all fasteners.
6. Test — Restore gas, leak-check every joint with soap solution, then restore power and confirm normal ignition and operation.

Signs You Need a Replacement

• Gas valve moves or vibrates because the bracket is loose
• Rusted, cracked, or bent support bracket
• Misaligned manifold or burners from an unsupported valve
• Bracket damaged during a prior gas valve service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.