ICP Gas Valve Support Bracket for RGS090SFBB0AAA — OEM Mounting | Ships Today

Overview

This is the genuine OEM gas valve support bracket (part 1178238) for the ICP/Tempstar/Heil RGS090SFBB0AAA gas furnace. The bracket holds the gas valve in its correct position relative to the burner manifold and gas supply piping, preventing strain on the threaded connections and keeping the valve aligned for safe, leak-free operation. A bent, corroded, or missing bracket allows the valve to sag or twist, which can stress the inlet/outlet fittings and create the conditions for a gas leak. If you are replacing a gas valve or rebuilding a manifold assembly on this furnace, installing the correct factory bracket is essential to restore the original mechanical support.

Specifications

Compatibility

Fits the ICP/Tempstar/Heil RGS090SFBB0AAA gas furnace and related manifold assemblies that use this support bracket. Confirm your furnace's burner/manifold layout matches before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve, bracket, and manifold orientation before removing anything.
4. Remove — Disconnect the gas line union as needed and unbolt the old bracket from the valve and cabinet.
5. Install — Mount the new bracket, reattach the gas valve in its original position, and reconnect piping per your photo.
6. Test — Restore gas and power, then leak-check all gas connections with soap solution and confirm proper ignition.

Signs You Need a Replacement

• Gas valve sagging, twisting, or unsupported in the cabinet
• Bent or corroded bracket from a prior valve replacement
• Stress or strain visible at the gas inlet/outlet fittings
• Missing bracket after a manifold service or rebuild

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.