ICP Gas Valve Mounting Bracket for RGS180SFAA0AAAA — OEM Replacement | Ships Today

Overview

This genuine OEM gas valve mounting bracket (part number 1184226) secures the gas valve assembly inside ICP Tempstar Heil RGS-series gas furnaces. The bracket holds the valve in the correct position and orientation relative to the manifold and burner assembly, keeping gas connections aligned and free of strain. While it carries no electrical or gas-flow rating itself, a damaged, corroded, or missing bracket can let the valve shift, stress the manifold pipe joint, and create gas leaks or noisy operation. Replacing a bent or rusted bracket restores proper valve support and is often required after a gas valve swap or when corrosion has compromised the original.

Specifications

Compatibility

Designed as a direct-fit replacement for ICP Tempstar Heil model RGS180SFAA0AAAA and related RGS180-series gas furnaces. As the original equipment manufacturer part, it matches the factory mounting hole pattern and valve geometry, so no drilling or modification is needed.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect electrical power, and verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the bracket, valve, and manifold orientation before disassembly.
4. Remove — Disconnect the gas valve from the manifold as needed, then unscrew the old bracket from the chassis and free the valve.
5. Install — Fasten the new bracket to the chassis, reseat the valve, and reconnect the manifold using fresh pipe sealant rated for gas.
6. Test — Restore gas and power, leak-test all joints with bubble solution, and run a heat cycle.

Signs You Need a Replacement

• Visible rust, corrosion, or cracking on the existing bracket.
• Gas valve that shifts, sags, or vibrates during operation.
• Bent or broken bracket discovered during a valve replacement.
• Stress or leaks at the manifold-to-valve connection.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.