ICP Gas Valve Mounting Bracket for RGS180LFCA0AAAA — OEM 1184226 | Ships Today

Overview

This OEM part (part number 1184226) is the gas valve mounting bracket for the ICP/Tempstar/Heil RGS180LFCA0AAAA furnace. Note: this is the bracket that secures the gas valve and manifold assembly in the burner compartment — it is not the gas valve itself. The bracket holds the valve at the correct height and alignment relative to the burners and manifold orifices. It is typically replaced when it is bent, corroded, or missing after a prior valve service, or when retrofitting a replacement gas valve that requires the OEM mounting position.

Specifications

Compatibility

Designed for the ICP/Tempstar/Heil RGS180LFCA0AAAA furnace and related ICP-family models using gas valve bracket 1184226. Confirm the part number against your existing bracket before ordering.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas supply. Verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve and bracket position and the manifold alignment before removing anything.
4. Remove — Support the gas valve, then remove the fasteners holding the old bracket and withdraw it.
5. Install — Position the new bracket, refasten it, and confirm the gas valve and manifold sit at the correct height and orientation per your photo.
6. Test — Restore gas and power, leak-check all gas connections with soap solution, then run a heat cycle and verify clean burner ignition.

Signs You Need a Replacement

• Bent, cracked, or corroded existing bracket
• Gas valve sits loose or out of alignment with the manifold
• Bracket missing after a prior gas-valve replacement
• Burner flame appears uneven due to misaligned manifold

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.